Wednesday, January 8, 2014

DIY Bandbell Bar Load Testing

Okay, so here is the bar with 200# on it.  Definitely is flexing, but seemed pretty darn solid still.  I was nervous to put on more weight as I didn't want to do any destructive testing.  I don't think I'll be sniffing 200# anytime soon with this thing (if at all).



Next time maybe I load the 55# plate onto the double-walled section (just need to slide it over 1"-2").  That would probably help since how I designed this thing the weights hang on single-walled tube.  I really wish the shipping on tube over 58" wasn't so dang expensive.  I would've double-walled the entire bar and then gotten 1.75" diameter 1" pieces for the band holders and just glued those over the double walled tubing.  Oh well.  I didn't think I would be using these weights actually after seeing how people struggled with 106# on this video:  http://www.youtube.com/watch?v=yWybDN10WJw.  I think their design definitely flexes more than mine at lower weight but can withstand 600#!!!  Crazy.  I almost think a solid 1.25" rod sleeved inside a 1.5" tube might be too rigid and not give the intended effect.

Maybe I'll get a 12" 1.75" diameter sleeve to put over the existing band holders and then get 2" diameter 1" pieces.  That would solve my single wall setup.  Or slip a couple of feet of 1" solid rod on the inside...  Even easier!

8 comments:

  1. This looks interesting. Question for you? Could I just buy the 2x 39"Lx1.25"D sleeve (Internal bar), and then buy 3x 26"Lx 1.50"D sleeve (Outer bar)? Wouldn't that solve the problem of shipping and the single-wall tube on the ends, if everything gets glued together anyway?

    ReplyDelete
  2. That should probably work - the thing I was worried about was would the splits in the bar create a weak spot? If you can source locally a 1.25" piece of solid fiberglass rod, I think that is the way to go. Then glue the small pieces on the end to hold the bands.

    ReplyDelete
  3. This is awesome. I have been wanting to make a Bamboo Bar. What wall thickness did you end up using for both bars?

    ReplyDelete
  4. Greatly shared. Its descriptive and clears the insights. Visit us for commercial gym set up services in India

    ReplyDelete
  5. Wow Really Very nice post Such a useful information thanks for sharing
    Gym Plats Manufacturers in India

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete